Software as a Service - Questions Answered

As we expected, last week's webcast on Software as a Service (Compliant Cloud Computing - Applications and SaaS) garnered a good deal of interest with some great questions and some interesting votes.


Unfortunately we ran out of time before we could answer all of your questions. We did manage to get around to answering the following questions (see webcast for answers)

• Would you agree that we may have to really escrow applications with third parties in order to be able to retrieve data throughout data retention periods?
• How is security managed with a SaaS provider? Do they have to have Admin access, which allows them access to our data?
• How do you recommend the Change Management (control) of the SaaS software be managed?
• How can we use Cloud but still have real control over our applications?
• What should we do if procurement and IT have already outsourced to a Saas provider, but we haven't done an audit?

As promised, we have answered the two remaining questions we didn't get time to address below.

 

Cloud computing is, not surprisingly, the big topic of interest in the IT industry and much of business in general. Cloud will change the IT and business models in many companies and Life Sciences is no different in that respect.

 

We've have covered this extensively during the last few months, leveraging heavily on the draft NIST Definition of Cloud Computing which is starting to be the de-facto standard for talking about the Cloud - regardless of Cloud Service Providers constantly inventing their own terminology and services!

If you missed any of the previous webcasts they were
- Qualifying the Cloud: Fact or Fiction?
- Leveraging Infrastructure as a Service
- Leveraging Platform as a Service


There are of course specific issues that we need to address in Life Sciences and our work as part of the Stevens Institute of Technology Cloud Computing Consortium is helping to define good governance models for Cloud Computing. These can be leveraged by Regulated Companies in the Life Sciences industry, but it is still important to address the questions and issues covered in our Cloud webcasts.

As we described in our last session, Software as a Service isn't for everyone and although it is the model that many would like to adopt, there are very few SaaS solutions that allow Regulated Companies to maintain compliance of their GxP applications 'out-of-the-box'. This is starting to change, but for now we're putting our money (literally - investment on our qualified data center) into Platform as a Service, which be believe offers the best solution for companies looking to leverage the advantage of Cloud Computing with the necessary control over their GxP applications.

But on to those SaaS questions we didn't get around to last week:

Q. Are you aware of any compliant ERP solutions available as SaaS?

A. We're not. We work with a number of major ERP vendors who are developing Cloud solutions, but their applications aren't yet truly multi-tenanted (see SaaS webcast for issues). Other Providers do offer true multi-tenanted ERP solutions but they are not aimed specifically for Life Sciences. We're currently working with Regulated Company clients and their SaaS Cloud Service Providers to address a number of issues around infrastructure qualification, training of staff, testing of software releases etc, . Things are getting better for a number of Providers, but we're not aware of anyone who yet meets the regulatory needs of Life Sciences as a standard part of the service.

The issue is that this would add costs and this isn't the model that most SaaS vendors are looking for. It's an increasingly competitive market and it's cost sensitive. This is why we believe that niche Life Sciences vendors (e.g. LIMS, EDMS vendors) will get their first, when they combine their existing knowledge of Life Sciences with true multi-tenanted versions of their applications (and of course, deliver the Essential Characteristics of Cloud Computing - see webcasts)

Q. You clearly don't think that SaaS is yet applicable for high risk applications? What about low risk applications?

 

A. Risk severity of the application is one dimension of the risk calculation. The other is risk likelihood where you are so dependent on your Cloud Services Provider. If you select a good Provider with good general controls (a well designed SaaS application, good physical and logical security, mature support and maintenance process) then it should be possible to balance the risks and look at SaaS, certainly for lower risk applications.

 

It still doesn't mean that as a Regulated Company you won't have additional costs to add to the costs of the service. You need to align processes and provide on-going oversight and you should expect that this will add to the cost and slow down the provisioning. However, it should be possible to move lower risk applications into the Cloud as SaaS, assuming that you go in with your eyes open and realistic expectations of what is required and what is available.

 

Q. What strategy should we adopt to the Cloud, as a small-medium Life Sciences company?

 

A. This is something we're helping companies with and although every organization is different, our approach is generally

• Brief everyone on the advantages of Cloud, what the regulatory expectations are and what to expect. 'Everyone' means IT, Procurement, Finance, the business (Process Owners) and of course Quality.
• Use your system inventory to identify potential applications for Clouding (you do have one, don't you?). Look at which services and applications are suitable for Clouding (using the IaaS, PaaS and SaaS, Private/Public/Community models) and decide how far you want to go. For some organizations IaaS/PaaS is enough to start with, but for other organizations there will be a desire to move to SaaS. Don't forget to think about new services and applications that may be coming along in foreseeable timescales.
• If you are looking at SaaS, start with lower risk applications, get your toe in the water and gradually move higher risk applications into the Cloud as your experience (and confidence) grows - this could take years and remember that experience with one SaaS Provider does not automatically transfer to another Provider.
• Look to leverage one or two Providers for IaaS and PaaS - the economies of scale are useful, but it's good to share the work/risk.
• Carefully assess all Providers (our webcasts will show you what to look for) and don't be tempted to cut audits short. It is time well worth investing and provides significant ROI.
• Only sign contracts when important compliance issues have been addressed, or are included as part of the contractual requirements. That way there won't be any cost surprises later on.
• Remember to consider un-Clouding. We've talked about this in our webcasts but one day you may want to switch Provider of move some services or applications out of the Cloud.

The Cloud is coming - in fact, it's already here. As usual, were not always the earliest adopters in Life Sciences, but you need to be prepared to move and take advantage. We hope that our webcasts have helped - please do let us know if you have any questions.

E-mail us at life.sciences@businessdecision.com

GAMP® Conference: Cost-Effective Compliance – Practical Solutions for Computerised Systems

A very interesting and useful conference held here in Brussels over the past two days, with a focus on achieving IS compliance in a cost effective and pragmatic way. It's good to see ISPE / GAMP® moving past the basics and getting into some more advanced explorarations of how to apply risk-based approaches to projects and also the operational phase of the system life cycle.


There was understandably a lot of discussion and highlighting of the new Annex 11 (Computerised Systems), with many of the presenters tying their topics back to the new guidance document, which has now been in effect for just two and a half months.

One of the most interesting sessions was when Audny Stenbråten, a Pharmaceutical Inspector of the Norwegian Regulator (Statens Legemiddelverk) provided a perspective of Annex 11 from the point of view of the regulator. It was good to see an open approach to the use of pragmatic risk-based solutions, but as was highlighted throughout the conference, risk-based approaches require a well-documented rationale.

Chris Reid of Integrity Solutions presented a very good session on Managing Suppliers and Service Providers and Tim Goossens of MSD outlined how his company is currently approaching Annex 11.

Siôn Wyn, of Conformity, provided an update on 21 CFR Part 11, which was really ‘no change’. The FDA are continuing with their add-on Part 11 inspections for the foreseeable future, with no planned end date and no defined plans on how to address updates or any changes to Part 11.

On the second day, after yours truly presented some case studies on practical risk management in the Business & Decision Life Sciences CRO and our qualified data center, Jürgen Schmitz of Novartis Vaccines and Diagnostics presented an interesting session on how IT is embedded into their major projects.

Mick Symonds of Atos Origin presented on Business Continuity in what I thought was an informative and highly entertaining presentation, but which was non-industry specific and was just a little too commercial for my liking.

Yves Samson (Kereon AG) and Chris Reid led some useful workshops looking at the broader impacts of IT Change Control and the scope, and scalability of Periodic Evaluations. These were good, interactive sessions and I’m sure that everyone benefitted from the interaction and discussion.

In the final afternoon René Van Opstal, (Van Opstal Consulting) gave an interesting presentation on aligning project management and validation and Rob Stephenson (Rob Stephenson Consultancy) presented a case study on Decommissioning which, although it had previously been presented at a GAMP UK meeting, was well worth airing to a wider audience.

All in all it was a good couple of days with some useful sessions, living up to its billing as suitable for intermediate to advanced attendees. On the basis of this session I’d certainly recommend similar sessions to those responsible for IS Compliance in either a QA or IT role and I’m looking forward to the next GAMP UK meeting, and to presenting at the ISPE UK AGM meeting and also the ISPE Global AGM meeting later in the year.

The use of Unique Device Identifiers in Healthcare

Monday 12th and Thursday 13th September saw a very interesting public meeting organized by the US FDA, entitled "Unique Device Identification (UDI) for Postmarket Surveillance and Compliance".

Rather than looking at details of the rule currently being developed for the unique identification for medical devices (details of which can be found at http://www.fda.gov/udi) the meeting looked at how UDIs would be used in the real world.

Whereas Pharmaceuticals is looking to reduce or prevent counterfeiting by the use of serialization (see our recent webcasts on serialization - "Strategic Management of Product Serial Identifiers" and "Serialized Labelling: Impacts on the Business Model"), in the medical devices sector there is a global drive to be able to uniquely identify medical devices at all point in the supply chain, at point of initial use and throughout the life of the device. Whereas pharmaceutical products are clearly identified (e.g. via the National Drug Code [NDC] in the US), this is not the case for medical devices.

At the moment medical devices are identified inconsistently my manufacturer, model, product name, hospital allocated item number, SKU# etc. As the public meeting heard, the ability to uniquely identify what a medical device is has significant benefits in terms of:

• More accurate device registries (e.g. of implantable devices)
• Faster and more focused product recalls
• Fewer patient/device errors (ensuring the right patient receives the right device)
• Better post marketing surveillance and adverse events reporting

Key to this will be not only the use of the UDI, but the development of data standards which will allow the significant therapeutic attributes of devices to the standardized. This will allow data to be analyzed by specific device model and attributes(e.g. drug coated stents versus polymer coated stents) and different models from different manufacturers to be compared in terms of patient outcome.

The tracking of devices via the Electronic Health Record (EHR) or Personal Health Record (PHR) is one of the most significant steps to enable all of this - where the EHR records the Unique Device Identifier to be recorded, and thereby linked to model number and manufacturer, to the batch/lot or serial number where required, and a host of other associated device data available from a manufacturers database.


This is part of a global initiative to uniquely identify medical devices via a Global Medical Device Nomenclature - which is important when you consider how important it is for a German cardiac specialist to know exactly what sort of heart pacemaker is implanted in the Australian tourist who has just been rushed in the emergency room!

Although we're most likely a year away from finalizing the FDA rule on UDI, and two years away for initial requirements for Class III devices, the use of UDI heralds the possibility of a new era in reduced hospital errors, better device safety, faster recalls, improved safety signal detection and the abilty to use real evidence - and not marketing hype - to know what the best device is for any given patient.


Details of the public meeting program and presentations can be found on the US FDA website at http://www.fda.gov/MedicalDevices/NewsEvents/WorkshopsConferences/ucm263947.htm